publications
2025
G. De Pasquale, F.E. Altunok, "Multiphase modeling of matrix/fiber-related damaging mechanism in multimaterial additively manufactured joints with 3D interlocking", Engineering Failure Analysis, vol. 170 (15), 109272, 2025, DOI: 10.1016/j.engfailanal.2025.109272. Link
2024
G. De Pasquale, D. Barra, "nTop5 User Guide", Kindle Direct Publisher, 389 pages, 2024. ISBN: 979-8346061793, 979-8346263807. Link
G. De Pasquale, F. Ursi, “Multi-material fittings with carbon fiber reinforcement from AM process: design and characterization”, In: F. Concli, L. Maccioni, R. Vidoni, D.T. Matt, Latest Advancements in Mechanical Engineering. ISIEA 2024. Lecture Notes in Networks and Systems, vol. 1124. Springer, Cham. DOI: 10.1007/978-3-031-70462-8_18. Link
S. Varetti, A. De Zanet, E. Pappa, C. Annicchiarico, A. Kumar, N. Gallo, M. Cabrioli, M. Vanazzi, F.E. Altunok, B. Destito and G. De Pasquale, “AlSi10mg additively manufactured anchors for a novel multimaterial hybrid joining for aerospace”, proc. SAMPE (Society for the Advancement of Material and Process Engineering) Europe Conference, Belfast (Ireland), 24-26 September 2024. Link
F.E. Altunok, F. Quarta, G. De Pasquale, “Modeling of local meso-scale interactions in metal-composite joints based on 3D anchors matrix”, proc. Int. Conf. on Composite Structures (ICCS27), Ravenna (Italy), 3-6 September 2024.
A. Coluccia, G. De Pasquale, "Fatigue behavior of 316L steel structural lattice beams under four-points-bending symmetric cyclic loading", proc. Int. Conf. on Composite Structures (ICCS27), Ravenna (Italy), 3-6 September 2024.
G. De Pasquale, “Strutture aeronautiche multimateriale basate su manifattura additiva metallica”, proc. 53° AIAS Conference, Napoli (Italy), 4-7 September 2024. Link
G. De Pasquale, F.E. Altunok, F. Quarta, "Multi-scaled failure analysis of rivets-free joints between AM metals and CFRP", proc. 10th Int. Conf. on Engineering Failure Analysis (ICEFA), Athens (Greece), 7-10 July 2024. Link
G. De Pasquale, F. Ursi, “Multi-material fittings with carbon fiber reinforcement from AM process: design and characterization”, proc. 3rd Int. Symp. on Industrial Engineering and Automation (ISIEA), Bolzano (Italy), 19-21 June 2024. Link
A. De Zanet, S. Varetti, E. Pappa, M. Spuller, J. Lackner, C. Annicchiarico, A. Kumar, N. Gallo, M. Russi, B. Destito, G. De Pasquale, “Coating for improved adhesion and corrosion resistance of a novel multimaterial hybrid AM AlSi10Mg – CFRP joint for aviation”, proc. Int. Symp. on Dynamic Response and Failure of Composite Materials (DRAF), Ischia (Italy), 17-21 June 2024. Link
G. De Pasquale, F.E. Altunok, C. Annicchiarico, N. Gallo, “Fluidic-structural modeling of loads transfer across AM-CFRP joints on flight structures”, proc. 3rd Int. Conf. on Nonlinear Solid Mechanics (ICoNSoM), Cagliari (Italy), 11-14 June 2024. Link
G. De Pasquale, “Additive manufacturing process optimization for innovative aluminium-carbon fibre reinforced polymer co-cured joints”, Invited talk at Metal AMS, Cetim, Senlis (France), 20-21 March 2024. Link
F.E. Altunok, G. De Pasquale, "Numerical cohesive zone modeling (CZM) of self-anchoring AM metal-CFRP joints", Fracture and Structural Integrity, vol. 18 (68), pp. 280-295, 2024. DOI: 10.3221/IGF-ESIS.68.19. Link Video
2023
A. Coluccia, G. De Pasquale, "Strain-based method for fatigue failure prediction of additively manufactured lattice structures", Nature Scientific Reports, vol. 13, 22775, 2023. DOI: 10.1038/s41598-023-49846-z. Link
A. Coluccia, G. De Pasquale, "Modellazione termo-meccanica in ottica affidabilistica di forni industriali per la produzione del cemento", proc. 52° AIAS Conference, Genova (Italy), 6-9 September 2023. Link
G. De Pasquale, D. Barra, "nTopology 4 User Guide", Kindle Direct Publisher, 178 pages, 2023. ISBN: 979-8870594767. Link
G. De Pasquale, A. Coluccia, "Modeling and Experimental Validation of CFRP-Metal Joints Utilizing 3D Additively Manufactured Anchors", ASME Journal of Manufacturing Science and Engineering, vol. 145 (11), 111004, 2023. DOI: 10.1115/1.4063110. Link
A. De Zanet, S. Varetti, E. Pappa, C. Annicchiarico, A. Ricciardi, M. Pagone, N. Gallo, A. Kumar, G. De Pasquale, "Novel Multimaterial Hybrid Joining Process for CFRP-metal Structures in Aviation Industry", proc. 10th Int. Conf. on Structural Analysis of Advanced Materials (ICSAAM), Zakynthos (Greece), 10-14 September 2023.
G. De Pasquale, "Thermal monitoring of braking systems using metal AM calipers with integrated sensors", proc. 10th ECCOMAS Thematic Conf. on Smart Structures and Materials (SMART), pp. 434-445, Patras (Greece), 3-5 July 2023. Paper
G. De Pasquale, F. Portis, "Shape Optimization of Metal Parts from Filament-Based AM Processes Based on Structural and Dimensional Analysis", proc. 1st ECCOMAS Conf. on Math 2 Product (M2P), Taormina (Italy), 30 May-1 June 2023. Link
F. Portis, G. De Pasquale, "Structural and Fluidic Analysis of Vertical Stabilizers with Co-Cured Metal-Composite Joints", proc. 1st ECCOMAS Conf. on Math 2 Product (M2P), Taormina (Italy), 30 May-1 June 2023. Link
S. Liseni, A. Coluccia, G. Meyer, C. Mittelstedt, G. De Pasquale, “Numerical method for energy absorption maximization in lattice structures and experimental validation”, proc. 17th European Conf. on Spacecraft Structures Materials and Environmental Testing (ECSSMET), Toulouse (France), pp. 1183-1189, 28-30 March 2023. Paper
A. Coluccia, G. De Pasquale, “Strain-based method for fatigue failure analysis of truss lattice structures: modeling and experimental setup”, proc. 17th European Conf. on Spacecraft Structures Materials and Environmental Testing (ECSSMET), Toulouse (France), pp. 1190-1194, 28-30 March 2023. Paper
G. De Pasquale, F.E. Altunok, F. Ursi, “Investigation of the Mechanical Strength of CFRP with Co-Cured Additively Manufactured Metal Inserts”, proc. 27th Int. Conf. on Fracture and Structural Integrity (IGF 27), Rome (Italy), p. 178, 21-24 February 2023. Link Video
G. De Pasquale, F.E. Altunok, F. Ursi, “Investigation of the Mechanical Strength of CFRP with Co-Cured Additively Manufactured Metal Inserts”, Procedia Structural Integrity, vol. 47, pp. 573-578, 2023. DOI: 10.1016/j.prostr.2023.07.067. Link
2022
G. De Pasquale, S. Sibona, “Hybrid materials based on polymers-filled AM steel lattices with energy absorption capabilities”, Mechanics of Advanced Materials and Structures, vol. 29 (18), p. 2570-2580, 2022. DOI: 10.1080/15376494.2020.1871536. Link
G. De Pasquale, “Design and Modeling of MEMS Microgrippers for Laser-Based Additive Manufacturing”, Micro, vol. 2, p. 225-239, 2022. DOI: 10.3390/micro2020015. Link Paper
A. Coluccia, G. Jiang, G. Meyer, G. De Pasquale, C. Mittelstedt, “Nonlinear static and dynamic modeling of energy absorption lattice structures behavior”, Mechanics of Advanced Materials and Structures, p. 1-12, 2022. DOI: 10.1080/15376494.2022.2064016. Link
G. De Pasquale, A. Coluccia, “Fatigue failure prediction in lattice structures through numerical method based on de-homogenization process”, Procedia Structural Integrity, vol. 41, p. 535-543, 2022. DOI: 10.1016/j.prostr.2022.05.06. Link Paper
G. De Pasquale, S. Plos, L. Zappulla, “Modeling and Validation of AM Metals/CFRP Joints Based on Patterned Surfaces and Fibers Engagement”, Key Engineering Materials, vol. 913, p. 293-299, 2022. DOI: 10.4028/p-h66klu. Link
G. De Pasquale, “Thermal sensing of am components through electronics embedding in LB-PBF process”, proc. Int. Conf. on Nonlinear Solid Mechanics (ICONSOM), Alghero (Italy), p. 105-106, 13-16 June 2022. Link
G. De Pasquale, “Fast and reliable method for supports release in metal am by sandblasting-driven process”, proc. Int. Conf. on Nonlinear Solid Mechanics (ICONSOM), Alghero (Italy), p. 101-102, 13-16 June 2022. Link
A. Coluccia, G. Meyer, C. Mittelstedt, G. De Pasquale, “Nonlinear dynamic modeling of the energetic behavior of multishaped lattice cells”, proc. 9th Int. Conf. on Mechanics and Materials in Design (M2D), Funchal (Portugal), p. 169-178, 26-30 June 2022. ISBN: 978-989-54756-3-6. Link
G. De Pasquale, A. Coluccia, A. Yudianto, A. Mura, “Design of cutting tools for L-PBF manufacturing and functional performances validation”, proc. 9th Int. Conf. on Mechanics and Materials in Design (M2D), Funchal (Portugal), p. 867-874, 26-30 June 2022. ISBN: 978-989-54756-3-6. Link
G. De Pasquale, A. Coluccia, “Fatigue analysis method for lattice structures from metal additive manufacturing”, proc. 2nd Mediterranean Conf. on Fracture and Structural Integrity (MEDFRACT 2), Catania (Italy), 14-16 February 2022. Link Video
G. De Pasquale, D. Barra, “Voronoi lattice-based orthotics with modular stiffness for additive manufacturing”, trans. on Additive Manufacturing Meets Medicine (AMMM), Lubeck (Germany), vol. 4, n. 1, 668, 13-15 September 2022. DOI: 10.18416/AMMM.2022.2209668. Link
G. De Pasquale, A. Scanavini, S. Barani, “Additive, controlli non distruttivi e diagnostica real time: l’utilizzo di sensori integrati per un monitoraggio continuo dell’integrità dei componenti”, proc. 2° Convegno Additive Manufacturing e Controlli Non Distruttivi (AIPnD), Brescia (Italy), 23-24 June 2022. Link
G. De Pasquale, “Produzione additiva di componenti in leghe metalliche con sensori integrati: tecnologia innovativa per l’IOT”, proc. Soluzioni digitali per la fabbrica connessa, Tecniche Nuove Spa, Manufacturing Congress, Bologna (Italy), 8 June 2022.
G. De Pasquale, A. Scanavini, S. Barani, “Processo innovativo per integrazione di sensori in parti metalliche da fabbricazione additiva”, proc. MECSPE, Bologna (Italy), 10 June 2022.
2021
G. De Pasquale, A. Tagliaferri, “Modeling and characterization of mechanical and energetic elastoplastic behavior of lattice structures for aircrafts anti-icing systems”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 235 (10), p. 1828-1839, 2021. DOI: 10.1177/0954406219853857. Link
G. De Pasquale, “Additive Manufacturing of Micro-Electro-Mechanical Systems (MEMS)”, Micromachines, vol. 12 (11), 1374, 2021. DOI: 10.3390/mi12111374. Link Paper
M. Graziano, G. De Pasquale, “Integration of Strain Sensors on Additively Manufactured Implantable Devices”, Journal of Materials Science and Engineering B, p. 133-137, 2021. DOI: 10.17265/2161-6221/2021.10-12.001. Link
A. Coluccia, G. De Pasquale, G. Meyer, C. Mittelstedt, “Modeling of lattice structures energy absorption under impact loads”, proc. 12th Int. Conf. on Mechanical and Aerospace Engineering (ICMAE), Athens (Greece), p. 494-499, 16-19 July 2021. DOI: 10.1109/ICMAE52228.2021.9522543. Link
G. De Pasquale, S. Plos, L. Zappulla, “Modeling and validation of AM metals/CFRP joints based on patterned surfaces and fibers engagement”, proc. 5th Int. Conf. on Composite Material, Polymer Science and Engineering (CMPSE), Bangkok (Thailand), 15-16 November 2021. Link
M. Graziano, D.W. Charig, N. Di Trani, A. Grattoni, G. De Pasquale, “Design and characterization of AM sensorized capsules for drug delivery devices”, trans. on Additive Manufacturing Meets Medicine (AMMM), Lubeck (Germany), vol. 3, n. 1, 504, 8-10 September 2021. DOI: 10.18416/AMMM.2021.2109504. Link
G. De Pasquale, L. Savigliano, “Numerical modeling of casted polymers reinforced with metal AM lattice structures for energy absorption applications”, proc. XXVII ECCOMAS Conf. on Computer Methods in Materials Technology (KOMPLASTECH), Krakow (Poland), 8-9 March 2021. Link
2020
G. De Pasquale, A. Buffon, L. Bongiorni, “Sensors integration in additive DMLS metal parts”, trans. on Additive Manufacturing Meets Medicine (AMMM), Lubeck (Germany), vol. 2, n. 1, 015, 9-11 September 2020. DOI: 10.18416/AMMM.2020.2009015. Link
G. De Pasquale, “Development and integration of AM lattice structures to reliable technological solutions”, trans. on Additive Manufacturing Meets Medicine (AMMM), Lubeck (Germany), vol. 2, S1, 9-11 September 2020. ISSN: 2749-3229. Link
2019
G. De Pasquale, F. Luceri, M. Riccio, “Experimental Characterization of SLM and EBM Cubic Lattice Structures for Lightweight Applications”, Experimental Mechanics, vol. 59, p. 469-482, 2019. DOI: 10.1007/s11340-019-00481-8. Link
G. De Pasquale, V. Ruggeri, “Sensing strategies in wearable bio-mechanical systems for medicine and sport: a review”, Journal of Micromechanics and Microengineering, vol. 29 (10), 103001, 2019. DOI: 10.1088/1361-6439/ab2f24. Link
G. De Pasquale, E. Bertuccio, A. Catapano, M. Montemurro, “Modeling of cellular structures under static and fatigue loads”, proc. II Int. Conf. on Simulation for Additive Manufacturing (SIM-AM), Pavia (Italy), p. 205-211, 11-13 September 2019. ISBN: 978-84-949194-8-0. Link
G. Bertolino, M. Montemurro, G. De Pasquale, “Multi-scale shape optimization of lattice structures: an evolutionary-based approach”, International Journal of Interactive Design and Manufacturing, vol. 13, p. 1565-1578, 2019. DOI: 0.1007/s12008-019-00580-9. Link
G. De Pasquale, F. Luceri, M. Riccio, “Experimental evaluation of selective laser melting process for optimized lattice structures”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 233 (4), p. 763-775, 2019. DOI: 10.1177/0954408918803194. Link
G. De Pasquale, “Lattice structures with stiffness gradient for loads transfer at bone-prosthesis interface”, trans. on Additive Manufacturing Meets Medicine (AMMM), Lubeck (Germany), vol. 1, n. 1, 12-13 September 2019. DOI: 10.18416/AMMM.2019.1909S10T04. Link
G. De Pasquale, L. Mastrototaro, V. Ruggeri, “Wearable sensing systems for biomechanical parameters monitoring”, Materials Today: Proceedings, vol. 7 (1), p. 560-565, 2019. DOI: 0.1016/j.matpr.2018.12.008. Link
G. De Pasquale, L. Zappulla, L. Scaltrito, V. Bertana, “Numerical and experimental evaluation of SLA polymers adhesion for innovative bio-MEMS”, Materials Today: Proceedings, vol. 7 (1), p. 572-577, 2019. DOI: 10.1016/j.matpr.2018.12.010. Link Paper
G. De Pasquale, F. Luceri, “Experimental validation of Ti6Al4V bio-inspired cellular structures from additive manufacturing processes”, Materials Today: Proceedings, vol. 7 (1), p. 566-571, p. 2019. DOI: 10.1016/j.matpr.2018.12.009. Link
V. Bertana, G. De Pasquale, S. Ferrero, L. Scaltrito, F. Catania, C. Nicosia, S.L. Marasso, M. Cocuzza, F. Perrucci, “3D Printing with the Commercial UV-Curable Standard Blend Resin: Optimized Process Parameters towards the Fabrication of Tiny Functional Parts”, Polymers, vol. 11 (2), 292, 2019. DOI: 10.3390/polym11020292. Link
2018
G. De Pasquale, L. Mastrototaro, “Glove-based systems for medical applications: review of recent advancements”, Journal of Textile Engineering & Fashion Technology, vol. 4 (3), p. 286-295, 2018. DOI: 10.15406/jteft.2018.04.00153. Link
G. De Pasquale, V. Bertana, L. Scaltrito, “Experimental evaluation of mechanical properties repeatability of SLA polymers for labs-on-chip and bio-MEMS”, Microsystem Technologies, vol. 24, p. 3487-3497, 2018. DOI: 10.1007/s00542-018-3753-1. Link
G. De Pasquale, V. Ruggeri, “Integrated sensing system for upper limbs in neurologic rehabilitation”, Procedia Structural Integrity, vol. 12, p. 82-86, 2018. DOI: 10.1016/j.prostr.2018.11.104. Link
G. De Pasquale, L. Mastrototaro, L. Pia, D. Burin, “Wearable system with embedded force sensors for neurologic rehabilitation trainings”, proc. Symp. on Design, Testing, Integration, and Packaging of MEMS/MOEMS (DTIP), Rome (Italy), 22-25 May 2018. DOI: 10.1109/DTIP.2018.8394187. Link
G. De Pasquale, F. Luceri, M. Romeo, “SLM-EBM processes optimization for metal lattice structures fabrication”, proc. 1st Int. Conf. on Mechanics of Advanced Materials and Structures (ICMAMS), Torino (Italy), 17-20 June 2018. ISBN: 9791220033114. Link
G. De Pasquale, M. Montemurro, A. Catapano, G. Bertolino, L. Revelli, “Cellular structures from additive processes: design, homogenization and experimental validation”, Procedia Structural Integrity, vol. 8, p. 75-82, 2018. DOI: 10.1016/j.prostr.2017.12.009. Link
M. Montemurro, G. De Pasquale, G. Bertolino, “Multi-scale optimization of lattice structures for biomechanical components”, proc. 1st Int. Conf. on Mechanics of Advanced Materials and Structures (ICMAMS), Torino (Italy), 17-20 June 2018. ISBN: 9791220033114. Link
G. De Pasquale, A. Mura, “Accelerated lifetime tests on e-textiles: Design and fabrication of multifunctional test bench”, Journal of Industrial Textiles, vol. 47 (8), p. 1925-1943, 2018. DOI: 10.1177/1528083717714483. Link
G. De Pasquale, A. Mura, “Electro-mechanical endurance tests on smart fabrics under controlled axial and friction forces”, Procedia Structural Integrity, vol. 8, p. 220-226, 2018. DOI: 10.1016/j.prostr.2017.12.024. Link
G. De Pasquale, A. Mura, “Dynamic response evolution of damaged SLM lattice structures”, proc. 1st Int. Conf. on Mechanics of Advanced Materials and Structures (ICMAMS), Torino (Italy), 17-20 June 2018. ISBN: 9791220033114. Link
C.G. Ferro, S. Varetti, G. De Pasquale, P. Maggiore, “Lattice structured impact absorber with embedded anti-icing system for aircraft wings fabricated with additive SLM process”, Materials Today Communications, vol. 15, p. 185-189, 2018. DOI: 10.1016/j.mtcomm.2018.03.007. Link
G. De Pasquale, V. Ruggeri, “Sistema di misura integrato per arti superiori in riabilitazioni neuro-motorie”, proc. AIAS Conference, Villa San Giovanni (Italy), 5-8 September 2018.
2017
G. De Pasquale, A. Mura, “Macchina per test accelerati di affidabilità su tessuti intelligenti”, proc. AIAS Conference, Pisa (Italy), 6-9 September 2017.
G. De Pasquale, M. Montemurro, A. Catapano, G. Bertolino, L. Revelli, “Cellular structures from additive processes: design, homogenization and experimental validation”, proc. AIAS Conference, Pisa (Italy), 6-9 September 2017.
2016
G. De Pasquale, S.G. Kim, D. De Pasquale, "GoldFinger: Wireless Human–Machine Interface With Dedicated Software and Biomechanical Energy Harvesting System," IEEE/ASME Transactions on Mechatronics, vol. 21 (1), p. 565-575, 2016. DOI: 10.1109/TMECH.2015.2431727. Link
G. De Pasquale, “Artificial human joint for the characterization of piezoelectric transducers in self-powered telemedicine applications”, Meccanica, vol. 51, p. 2259-2275, 2016. DOI: 10.1007/s11012-016-0359-5. Link
G. De Pasquale, “Interfaccia uomo-macchina indossabile alimentata da energia biomeccanica”, proc. AIAS Conference, Trieste (Italy), 7-10 September 2016.
2015
G. De Pasquale, “Biomechanical Energy Harvesting: Design, Testing, and Future Trends in Healthcare and Human-Machines Interfacing", in Innovative Materials and Systems for Energy Harvesting Applications, Chapter 11, p. 290-340, IGI Global Ed., 2015. DOI: 10.4018/978-1-4666-8254-2.ch011. Link
G. De Pasquale, S.G. Kim, D. De Pasquale, “Optical HMI with biomechanical energy harvesters integrated in textile supports”, Journal of Physics: Conference Series, vol. 660, 012031, 2015. DOI: 10.1088/1742-6596/660/1/012031. Link
G. De Pasquale, A. Lentini, “Diagnostic Systems for Pregnancy Healthcare through Telemedicine Networking”, Journal of the Society for Information Display, vol. 31 (4), p. 18-22, 2015. DOI: 10.1002/j.2637-496X.2015.tb00826.x. Link
2013
G. De Pasquale, “Energy harvesters for powering wireless systems", in Handbook of Mems for Wireless and Mobile Applications, Chapter 11, p. 345-400, Woodhead Publishing Series, 2013. DOI: 10.1533/9780857098610.2.345. Link